|
| |
|
Title/Description |
|
|
|
 |
|
7 Inch Pocket Door Keyed Entry Set, Omnia 7035/A
Omnia's 7 Inch Pocket Door Keyed Entry Set is one way to add security to a sliding door. The latch hooks into the door frame to secure the pocket door and is operated by a key from the exterior and by a thumbturn from the interior. It comes packaged with 2 flush pulls, a Schlage keyway, a keyed entry mortise box complete with retractable finger pull, the mortise faceplate, strike, and the mounting hardware. The Rectangular Keyed Mortise Pocket Door Hardware is available in a wide array of fantastic finishes.
|
|
|
 |
|
Palo Alto Pocket Door Passage Set, Baldwin PD007-PASS
out the sharp edges and square-shapes that so many modern door hardware pieces have adapted in the last few years. The arched design is sleek and clean, spanning the gap between classic tastes and the need for modern designs. A passage set, the PD007 comes packaged with two pulls, one for each side of the door. It has just a .15 inch projection that makes it great for sliding pocket doors. It is installed by mortising it into the door.
|
|
|
 |
|
Boulder Pocket Door Passage Set, Baldwin PD016-PASS
The Boulder Pocket Door Passage Set has an arched shape that makes it fit beautifully into contemporary home styles. A passage set, the PD016 comes packaged with two pulls, one for each side of the door. It has just a .16 inch projection that makes it great for sliding pocket doors. It is installed by mortising it into the door.
|
|
|
 |
|
8.3 Inch Santa Monica Pocket Door Privacy Set, Baldwin PD005-PRIV
The 8.3 Inch Santa Monica Pocket Door Privacy Set comes with two pulls and a mortise lock that can be thrown and retracted by either the thumbturn on the interior or by turning the node on the exterior. This lockset is for privacy only and can be unlocked from the outside in case of an emergency. It can be used on doors that have a 2-1/2 inch backset that are at least 1.5 inches thick. Choose from several beautiful finishes.
|
|
|
 |
|
1-7/8 Inch Round Flush Pull, Deltana FP178
This round flush pull has a 1-7/8 inch diameter and a 1-1/8 inch finger cutout. The 1-7/8 Inch Round Flush Pull looks simple; but don't let that deter you because it is available in 10 finishes so you can match almost any decor. Flush pulls like this one are ofter used on sliding pocket doors or barn doors.
|
|
|
 |
|
Keyed Entry Palo Alto Pocket Door Set, Baldwin PD007-ENTR/832xEMHT
This Keyed Entryset comes with everything you need to add a keyed lock to any sliding door. The arched design of the Keyed Entry Palo Alto Pocket Door Set is sleek and clean, spanning the gap between classic tastes and the need for modern designs. It is available for 1-1/2 inch, 1-3/4 inch, 2 inch, 2-1/4 inch or 2-1/2 inch door thicknesses with a 2-1/2 inch backset.
|
|
|
 |
|
Large Santa Monica Pocket Door Passage Set, Baldwin PD005-PASS
The Large Santa Monica Passage Set can be used for any sliding door including barn doors and pocket doors. It measures 8.3 inches tall and 2.3 inches wide and has just a .15 inch projection so it will fit in even the narrowest of spaces. It is available in a wide array of finishes. A passage set, the Baldwin PD005 comes packaged with two pulls, one for each side of the door.
|
|
|
 |
|
Large Flush Ring Pull, Deltana FRP25
Flush Ring Pulls are especially designed for cabinets or doors when you want a flush (non protruding) handle pull. The Large Flush Ring Pull's solid brass construction is durable, allowing for years of continuous use and is resistant to corrosion. It measures 2-1/2 inches high and 1-7/8 inches wide. Comes packaged with matching finish screws for easy installation. Available in 9 great finishes.
|
|
|
 |
|
Large Solid Brass Flush Pull, Deltana FP4134
This large rectangle flush door pull is for pocket doors, sliding doors, or even cabinet doors. The Deltana made Large Solid Brass Flush Pull measures 4 inches high and 1-3/4 inches wide with a total depth of 7/16 inches. Flush pulls are mortised into the face of the door for a contemporary and sleek look. Available in 10 great finishes, it is packaged with matching finish mounting hardware.
|
|
|
 |
|
4 Inch Pocket Door Edge Pull, Deltana EP475
This door pull installs in the edge of the door, to pull a sliding door out of its pocket. The Solid Brass Pocket Door Edge Pull measures 4 inches high by 3/4 inches wide. Its narrow width allows for installation on narrow or standard 1-3/8 inch wide doors. A spring loaded pull lever, it automatically returns to a position that is flush with the plate when released. It includes matching finish installation screws and is available in 12 great finishes.
|
|
|
 |
|
2-1/8 Inch Round Flush Pull, Deltana FP221R
This flush pull installs on flush on pocket doors and by pass closet doors to allow you to slide the door open or closed. Normally used on standard pre-drilled doors (common bore hole size for a regular door knob or lever). The Solid Brass Round Flush Pull measures 2-1/8 inches inside cup diameter. Available in nine finishes.
|
|
|
 |
|
Rectangle Flush Door Pull, Deltana FP222
This Deltana made solid brass rectangular flush door pull is for use on pocket doors, sliding doors, cabinet doors, any door where a lush with the door face pull is desired. It measures 3-1/8 inches high by 15/16 inches wide. Packaged with matching finish mounting screws for easy installation.
|
|
|
 |
|
Heavy Duty Privacy Pocket Door Lock, Deltana SDLA325
For use on sliding pocket doors, this privacy set is for doors that may need to be locked for privacy such as those found leading into bedrooms and bathrooms. An emergency turn on the exterior can unlock it. The Heavy Duty Privacy Pocket Door Pull is for use on 1-3/8 inch and 1-3/4 inch thick pocket doors. It has a built in flip out edge pull, to get the sliding door out of its pocket. Easy to install, it comes packaged with all mounting hardware. Manufactured by Deltana, the nation's most complete provider for all your door hardware needs. Available in 11 finishes.
|
|
|
 |
|
Heavy Duty Passage Pocket Door Pull, Deltana SDPA325
For use on sliding pocket doors, this Heavy Duty Passage Set is for pocket doors that do not need to be locked like those leading to closets and hallways. It is for use on 1-3/8 inch and 1-3/4 inch thick pocket doors. The Solid Brass Pocket Door Pull Set has a built in flip out edge pull, to get the sliding door out of its pocket. Easy to install, it is packaged as a complete set with all mounting hardware. Manufactured by Deltana, the nation's most complete provider for all your door hardware needs. Available in 9 finishes.
|
|
|
 |
|
Privacy Pocket Door Lock, Deltana SDL25
For use on sliding pocket doors, the Privacy Pocket Door Lock is for use on doors that may need to be locked for privacy such as those found on bathrooms and bedrooms. An emergency turn on the exterior can unlock it. Standard duty, it is for for use on 1-3/8 inch thick pocket doors. The Privacy Solid Brass Pocket Door Pull has a built in flip out edge pull, to get the sliding door out of its pocket. Easy to install, it comes packaged with all mounting hardware. Available in 10 finishes.
|
|
|
 |
|
Solid Brass Square Cup Pull, Omnia 7504/52
The Contemporary Square Cup Pull is made out of solid brass and available in an array of not only beautiful but also popular finishes. This flush pull is pressured mounted into the door for a screw-less installation. The Solid Brass Square Pocket Door Pull is for use on sliding pocket doors and barn doors. It can also be used as a furniture pull or a lightweight kitchen cabinet pull.
|
|
|
 |
|
Round Pocket Door Passage Set, Kwikset 334-RDT
The Round Pocket Door Passage Set has a clean look and easy installation, and is made to fit standard pre-drilled doors (2-1/8 inch diameter bore hole). Normally used when a pre-drilled door is installed as a sliding pocket door, and the door does not need to latch or lock. Express who you with one of the 7 available finishes that complements your home. Good for doors with 2-3/8 inch backsets. Adjustable for door thicknesses from 1-3/8 inches to 1-3/4 inches.
|
|
|
 |
|
Round Pocket Door Lock Privacy, Kwikset 335-RDT
This round pocket door lock has a clean look and is easy to install. Made to fit a standard 2-1/8 inch diameter pre-drilled bore hole. Normally used when a pre-drilled door is installed as a sliding pocket door, and the door does may need to be locked for privacy such as on a bathroom or bedroom. Express who you with one of the 7 available finishes that complements your home. Good for doors with 2-3/8 inch backsets. Adjustable for door thicknesses from 1-3/8 inches to 1-3/4 inches.
|
|
|
 |
|
Century Solid Brass Round Flush Pull, Omnia 7503/52
This Solid Brass Round Flush Pull is made by Omnia with the attention to quality that you'd expect from a leader in door hardware for over 50 years. This Round Cup Pull is pressure-mounted into the door for a sleek, screw-less installation. Choose from a wide array of finishes, including the ever popular polished chrome, satin nickel, and oil rubbed bronze.
|
|
|
 |
|
4 Inch Knurled Flush Pull, Emtek 222304
The 4 Inch Knurled Flush Pull features a unique knurled designed meant to match perfectly with all of Emtek Knurled Door Hardware. This modern flush pull is one of the first with the knurled design, so you can be on the leading edge of contemporary home decor. The 1-3/4 x 4 Modern Rectangular Knurled Flush Pull is for use on sliding doors like pocket doors. Choose from your favorite modern finish color options.
|
|
|
|
Page 8 of 36
|
