|
| |
|
Title/Description |
|
|
|
 |
|
ADA Compliant Surface Mounted Privacy Lock for Barn Doors, INOX BD1023
The ADA Compliant Surface Mounted Privacy Lock for Barn Doors installs on any type of wall or jamb casing for a unique way to lock a sliding barn door that looks modern and sleek. The lock case is mounted to the wall or door jamb perpendicular to the door. It is surface mounted so there is no need to bore large holes into your drywall. A dust-proof strike is then installed on the barn door. One side is the strike that accepts the lock bolt, and the other side that goes through to the exterior of the door is an emergency release button. The ADA Compliant Privacy Lock for Barn Doors meets the no grasp, no pinch standard.
|
|
|
 |
|
U Pull ADA Compliant Sliding Door Privacy Set, INOX PHIX31108PD8340-ADA
This is a complete sliding door lockset with ADA surface pulls and thumbturn. The U Pull ADA Compliant Sliding Door Privacy Set meets the no grasp, no pinch requirements for the ADA Standard. It comes packaged with 2 pulls, a privacy function cylinder, and a mortise box. The 8-3/4 Pull Privacy Lock for Sliding Door is available in satin stainless steel and polished stainless steel finish colors.
|
|
|
 |
|
Tribeca T-Bar Lever with Urban Modern Rosette, Emtek 5306TATR
The Tribeca T-Bar Lever with Urban Modern Rosette has a Retro-Modern feel that makes it a great choice for century modern home renovations. This T-Bar Tribeca Lever with Urban Modern Rose is available in a wide array of beautiful finishes. It will fit fit 1-1/4 inch to 3 inch thick doors with a 2-1/8 inch bore standard door preparation. Choose from 2-3/8 inch or 2-3/4 inch backsets. The Tribeca Lever with Modern Urban Rose is available in dummy, passage, and privacy functions.
|
|
|
 |
|
Automatic Release Door Flip Guard, Don-Jo 1606
All the new hotels are installing this Automatic Release Door Flip Guard because it keeps their guests safe while protecting their doors from damage that traditional security flip guards can cause. The Hotel Door Flip Guard is installed on the door frame. While a guest or homeowner is inside, they can flip the guard plate out and it will keep the door from being opened even when it is unlocked, just like a traditional security door guard. However, this one has an automatic release that keeps it from being used as a hold open stop. Where guests used to flip the guard arm into the door opening to keep it from closing and locking them out when they ran down the hall for ice--causing the door and the guard damage as they banged together--the Don-Jo 1606 Door Flip Guard automatically closes when the door does, keeping both free from damage. These are also great for use on fire doors that must remain closed since guests can no longer use the security flip guard to prop open the door.
|
|
|
 |
|
Wide Door Crash Bar Vertical Rod Door Exit Device, Global ED-VR331-48
This wide door crash bar style surface vertical rod panic device is the perfect choice for double doors without mullions, doors with glass and doors that are not flat. Suitable for most medium and wide stile doors (aluminum, hollow metal, or wood), durable enough for most applications.
|
|
|
 |
|
Highgate Double Door Handleset with Dummy, Deltana PRHHL/PRHHDL
This Highgate Handleset is packaged as a complete set for a pair of Double Doors including one side with a Single Cylinder Function and the other Dummy Function. For the single cylinder, a thumb piece operates the latch and a key operates the deadbolt from the exterior; and the lever operates the latch and a thumbturn operates the deadbolt from the interior. The Dummy Function does not function--neither locking nor latching. The Highgate Double Door Handleset with Dummy is designed to fit doors 1-3/8 inches through 2 inches thick with backsets of either 2-3/8 inches or 2-3/4 inches. Choose from satin nickel, polished chrome, polished brass, or oil rubbed bronze finishes for this modern handleset.
|
|
|
 |
|
Contemporary Square Rose Leverset, Omnia 912SQ
The Omnia 912 contemporary door lever with square rose is the perfect addition to contemporary homes with its sleek, clean lines that reflect the current style trends that are so popular in home decorating right now. the Omnia 912SQ leversets are available in 8 finishes and 4 functions.
|
|
|
 |
|
36-inch or less Grade 2 Exit Device, Global ED-301
Crash Bar Exit Device. Global Series ED-301 Global Series ED-301 crash bar style exit devices are suitable for medium or wide stile aluminum and hollow metal doors including store front glass doors. Modern styling and available in Aluminum or Dark Bronze finish.
|
|
|
 |
|
4 Inch Cabin Swivel Door Hook, Deltana CHK4
Made of solid brass this 4 Inch British style cabin door hook features 2 pivoting points allowing it to move in and out plus move up and down. It can be used on any type of door, including cabinet doors, to lock in closed or open positions. Easy to install. Packaged complete with hook eye and all mounting hardware.
|
|
|
 |
|
San Juan Hand Forged Pull with Diamond Mounts, First Impressions SNJ2015FRDSST
Fit for a castle, the San Juan Pull with Diamond Mounts makes a bold impression that is suited well for old world style homes. This hand forged pull is 15-3/4 inches long with 9-11/16 inch mounting centers. They are great for rustic barn door handles. Choose from matte black or dark brown lithonia finishes.
|
|
|
 |
|
Surface Wall Mount Electromagnetic Door Holder, ABH 2300
Electromagnetic Door Holders like this one are typically used on fire / smoke barrier doors in conjunction with fire alarm systems and a door closer. Durring a non-emergency situation--when the fire alarm is not triggered--the door is held in the open position by a magnet. By itself, it has about 35 lbs. of holding force so the door can be closed manually. When the fire alarm system is triggered, power to the electromagnet cuts off so that a door closer can then close the door. This system has been approved by both the California Fire Marshall and the City of New York's MEA index set by the Department of Buildings. The Surface Wall Mount Electromagnetic Door Holder can also be used on private offices to hold the door open until it is released by a remote switch.
|
|
|
 |
|
Satin Stainless Steel 5 Inch Flush Pull, Omnia 7012/0
The Satin Stainless Steel 5 Inch Flush Pull comes packaged with the mounting hardware. It is for use on sliding pocket doors. The small, 3/32 inch projection ensures that it will fit in even the narrowest of pocket door gaps.
|
|
|
 |
|
Arched 7 Inch Flush Pull, Omnia 7039/0
The Arched 7 Inch Flush Pull has a classic look that will blend seamlessly into almost any decor. The arched shaped paired with the beveled edge makes this sliding door flush pull a stunning example of traditional home decor. The Traditional Arched Flush Pull is available in a wide selection of beautiful finishes. It comes packaged with the necessary mounting hardware.
|
|
|
 |
|
Da Vinci Mortise Handleset, Emtek 3331
The Da Vinci Mortise Handleset has an ornately styled oval mount that will surely add a bit of the old world beauty that is so often lost in the modern world. This traditional Oval Da Vinci Mortise Entrance Handleset is available in either dummy or single cylinder functions. The single cylinder ANSI F20 mortise box can be toggled to lock automatically upon closing the door. The Ornate Da Vinci Mortise Entrance Handleset will fit either 2-1/2 inch or 2-3/4 inch backsets and can accommodate doors from 1-3/4 inches to 2-3/4 inches thick. This classic door handle is made out of lost wax cast bronze; choose from a flat black bronze finish or a medium bronze finish.
|
|
|
 |
|
Lost Wax Bronze 8 Inch Palermo Column Door Pull, Emtek 86167
The Lost Wax Bronze 8 Inch Palermo Column Door Pull is traditionally styled, making it an instant classic. The barrel middle door handle is easy to install and comes packaged with the necessary mounting hardware to thru-bolt it on a door up to 1-3/4 inches thick. The 8 Inch Palermo Lost Wax Door Handle is available in either flat black or medium bronze finishes.
|
|
|
 |
|
Tuscany Palermo Back-To-Back Door Handle Pair, Emtek BTB-86167
The Tuscany Palermo Back-To-Back Door Handle Pair features the ever popular barrel middle design. It is this design that has become a classic amongst traditional hardware because it is chic but still has an air of the old world. The Back-to-Back 8 Inch Palermo Door Pull Set comes packaged as a set of 2 handles and the necessary mounting hardware. It will fit doors 1-3/8 inches to 2-1/4 inches thick. Choose from either flat black or medium bronze finishes.
|
|
|
 |
|
8 Inch Rustic Twig Cabin Door Handle, Emtek 86090
The 8 Inch Rustic Twig Cabin Door Handle gives off a slight impression of the great outdoors but manages to do it in a modern way. A little rustic and very chic, this door pull by Emtek is perfect for log cabins and contemporary apartments alike--anywhere a tasteful reminder of the natural world is desired. Each one is crafted traditionally out of bronze using sandcasting techniques, granting each its own unique character. Every one of the Sandcast Bronze Branch Door Handles is a little different, a little work of art. The Twig 8 Inch Pull will fit doors up to 1-3/4 inches thick and comes packaged with everything you'll need to thru-bolt mount it on a wood, fiberglass, or metal door. Choose from matte black, medium bronze, and tumbled white bronze finishes.
|
|
|
 |
|
8 Inch San Carlos Door Pull, Emtek 76028
The 8 Inch San Carlos Door Pull looks like it came straight from the old world. This castle style door pull is made out of wrought steel and is available in either a flat black steel or satin steel finish. Both of these finish colors have a rough texture for a truly rustic end look--a look that would be at home on any period style door. The San Carlos 8 Inch Wrought Steel Door Handle comes packaged with the necessary mounting hardware to thru-bolt it on a door up to 1-3/4 inches thick.
|
|
|
 |
|
8 Inch San Carlos Back-to-Back Door Pull, Pair, Emtek BTB-76028
The 8 Inch San Carlos Back-to-Back Door Pull has a rustic look that makes it a great choice for period style homes. The San Carlos Wrought Steel Back-to-Back Pull Set comes packaged with 2 door handles and mounting hardware. It will fit doors 1-3/8 inches to 2-1/4 inches thick. The San Carlos Pull Set is available in either a flat black steel or satin steel finish. Both of these finish colors have a rough texture for a truly historic end look.
|
|
|
 |
|
2-1/4 Inch Sliding Glass Door Finger Pull, SGS-RKS-1
Low Profile Finger Pull is made for glass door applications like shower doors. Even with such a low profile, it is comfortable to operate with a 7/16 inch recess with a slight lip for fingers to catch on to. Available in Polished Chrome, or Brushed Nickel finish.
|
|
|
|
Page 31 of 35
|
