|
| |
|
Title/Description |
|
|
|
 |
|
Stainless Steel Floor Mount Glass Door Hold Open & Stop
Stainless steel with black rubber bumper ring for use of doors up to 2-3/8" thick. Easy to install. Concealed mounting for a clean installation. For use on residential and commercial doors. Easy to operate. Simply pivot the end of the stop with your foot. The smaller rubber bumper will cradle the door holding it open. Kick it back when you want to close the door. With rubber bumper rings on both sides protect your doors.
|
|
|
 |
|
48 Inch Rain Guard Vinyl Blade Sweep, NGP 101V-48
This rain guard door sweep has a 3/4" projection off the door to channel water away for the door. Vinyl blade sweep help seal the doors bottom specially if there is a gap. Made from Aluminum alloy 6063 and has slotted screw holes for easy adjustments. Available in Aluminum or Dark Bronze finish.
|
|
|
 |
|
48 Inch Rain Drip Guard Door Sweep, NGP 1015V-48
This 48" rain guard door sweep has a 5/8" projection off the door to channel water away for the door. Vinyl blade sweep help seal the doors bottom specially if there is a gap. Made from Aluminum alloy 6063 and has slotted screw holes for easy adjustments. Available in Aluminum or Dark Bronze finish.
|
|
|
 |
|
Goose Style Door Stop, Emtek 2253
This 2-7/8" high floor mounted door stop is made of solid brass by Emtek. It is packaged complete with all installation hardware. Choose from a huge selection of finish colors.
|
|
|
 |
|
Satin Stainless Steel Floor Door Stop, FDS731-630
Satin stainless steel floor door stop with black bumper ring. Very easy to install. Just unscrew door stops top then screw directly to a wood surface or to the included floor anchor. Made of 304 stainless steel.
|
|
|
 |
|
Hinge Pin Door Stop, Emtek 2241
The Emtek Hinge Pivot Stop is for use with solid brass hinges. This Hinge Pin Door Stop is mounted on a door hinge pin instead of on the floor or baseboard. Easily adjustable, simple to use, out of the way and out of sight. We use them on or doors to keep the stops out of reach of the crawling babies! Choose your favorite of the many available finishes.
|
|
|
 |
|
Dome Door Stop, Emtek 2251
Typically dome door stops are used in commercial buildings such as schools, shopping malls and offices. The Dome Door Stop is mounted to the floor and comes packaged with mounting hardware. The Half Dome Door Stop is available in a wide selection of finish colors.
|
|
|
 |
|
Transitional 3-1/2 Inch Door Stop, Deltana UFBD3505
The Transitional 3-1/2 Inch Door Stop is made out of solid brass and is available in a wide selection of finish colors. Its graceful design is stunning in any finish. This floor mounted door bumper is ideal for transitional decors. The 3-1/2 Inch Transitional Brass Floor Door Stop is easy to install by drilling a single hole.
|
|
|
 |
|
3 Inch Magnetic Door Stop and Holder, Emtek 2256
The Emtek 2256 Magnetic Door Stop and Holder is made up of a 3 inch long base section--which has a permanent magnet on the end--and the receptor is screwed onto the door. The 3 Inch Magnetic Door Stop can be mounted to the floor, the wall, or the baseboard.
|
|
|
 |
|
1-1/2 Inch Cylinder Floor Bumper, Emtek 2257
The 1-1/2 Inch Cylinder Floor Bumper comes packaged with the necessary mounting screws. This door bumper is mounted to the floor to protect the wall from damage from your door knob. It is made out of solid brass and comes in your choice of fashionable finish colors.
|
|
|
 |
|
Modern Cube Door Stop, Deltana FDBB134
Deltana's 1-3/4" modern cube door stop is mounted to the floor, allowing the bottom of the door to contact it. It is easy to install with the included mounting hardware. If using near a wall, you want to mount this in a position so that the bumper makes contact before the door lever hits the wall. Thus protecting not just the door, but the wall and door lever as well. Available Matte Black, Polished or Brushed Stainless Steel finishes.
|
|
|
 |
|
Rubber Door Silencer, 100 Pack, Don-Jo 1608
Don-Jo 1608 Rubber Door Silencer, 100 pack. This door cushioning rubber is for use on Metal Door Frames. The dark gray rubber cushions push into a 3/16" - 1/4" diameter hole that is drilled in a metal door frame. Normally used on commercial, hospital and hospitality doors to silence the door.
|
|
|
 |
|
36 Inch Rain Drip Guard Door Sweep, NGP 1015V-36
This 36" rain guard door sweep has a 5/8" projection off the door to channel water away for the door. Vinyl blade sweep help seal the doors bottom specially if there is a gap. Made from Aluminum alloy 6063 and has slotted screw holes for easy adjustments. Available in Aluminum or Dark Bronze finish.
|
|
|
 |
|
Floor Mounted Magnetic Door Stop, Deltana MDHM
The 2 Inch Modern Magnetic Door Holder is installed by floor mounting the catch and mounting the magnet base onto your door. When the door is opened, the magnet catches on to the stainless steel holder, thus securing the door. The floor mounted body is made high-impact black nylon with the inner stainless steel pop-out catch. The Floor Mounted Magnetic Door Stop is available in 2 finishes.
|
|
|
 |
|
Stainless Steel Floor Door Stop, AHI No.731-630
Solid stainless steel with black bumper ring. Very easy to install. Just unscrew door stops top then screw directly to a wood surface or to the included floor anchor. Satin stainless steel finish.
|
|
|
 |
|
T-Bar Hold Open Arm, Deltana DCHA4041
T-Bar style Cush-N-Stop Hold Open arm for 4040 Series Style Closers. Fits Deltana DC40 Door Closers.
|
|
|
 |
|
Adhesive Mount Wall Door Stop, DWD-WS726-630
1-1/2" long adhesive mount wall door stop. Stick onto tile, glass, metal or any smooth clean surface.
|
|
|
 |
|
Satin Stainless Steel Floor Mount Door Stop, DWD-FDS72750-630
The Satin Stainless Steel Floor Mount Door Stop has a contemporary design that makes it perfect for modern spaces. It is easy to install, simply remove the bumper tip and screw directly to a wood surface or to the included anchor. This floor mounted door stop is 2 inches long and has a black rubber tip.
|
|
|
|
Page 11 of 11
|
