Reguitti SDK092PV Modern Square Pocket Lock Privacy
All new modern design square sliding pocket door privacy lock that offers both fashion and high quality function. Packaged as a complete set that includes the privacy mortise lock body, two (2) square flush pulls, a square edge pull, a strike plate and all mounting hardware. Made in Italy by Reguitti.
Available in 3 high quality finishes and for both 1-3/8" and 1-3/4" thick pocket doors.
The square edge pull is pressure mounted into the door's edge. The square flush pulls are pressure mounted into the door's face - no screws show for a clean contemporary appearance.
Privacy Lock: Locks but has access to unlock from the outside via an emergency turn. A privacy lock does not offer security, it offers privacy.
Also available matching:
Modern Square Pocket Door Pull Set and
Modern Square Double Pocket Door Lock Set
Specifications for the SDK092PV Modern Square Pocket Lock:
- Mortise Lock Body Height: 1-11/16"
- Mortise Lock Body Thickness: 1/2"
- Mortise Lock Body Depth: 2-1/2"
- Mortise Lock Faceplate Height: 3-3/8"
- Flush Pull Total Height: 2-1/16"
- Flush Pull Total Width: 2-1/16"
- Flush Pull Total Depth: 9/16"
- Flush Pull Door Cutout Depth: 1/2"
- Exterior Trim Projection: 1/16"
- Interior Trim Projection: 3/16"
- Flush Pull Door Cutout Diameter: 1-7/8" (48 mm)
- Edge Pull Diameter: 1-1/8" Square
- SDK092PV Dimensions (PDF)
- SDK092PV Instalation Template (PDF)
*Note: The inside thumb turn project 3/16" off the door's face. If you intend to use on a pocket door, please insure that you have more than 3/16" clearance between the door's face and the wall pocket.
*Sold as a Set: privacy mortise lock body, two (2) square flush pulls, square edge pull, strike plate and all mounting hardware. For One (1) Door.